KitchenAid KSRA25FK Refrigerator Service
A compressor that cycles much longer or shorter than the cabinet needs is the usual complaint about a KSRA25FK, and the culprit is often a control that reads the cabinet wrongly. This discontinued KitchenAid refrigerator is also sold as the KSRA25FKSS and KSRA25FKWH; the checks are identical.
We start by comparing the control’s reading with a thermometer, then look at the water side if a feed is plumbed in, because drips at the inlet valve or supply line are easily missed. A start device that has failed makes the compressor hum for a moment, then trip off. An aging control board comes last, and we confirm a replacement exists before quoting.
The price is written and approved before work starts, and our 30-day workmanship warranty applies to everything we install.
The control may be reading the cabinet as warmer than it is, so the compressor keeps running. We compare its readings with a thermometer and replace the sensor or control that disagrees.
Yes. The supply line and its fittings can seep, especially at the valve. We trace the line with dry paper, tighten or replace the fitting, and run water to confirm it is dry.
Replace it when testing confirms it is the cause and a replacement is available. We advise doing it before it fails completely, since sourcing a board in a hurry on a discontinued model can be difficult.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
